Bell Cranks - Page 29 of 59
1465 part numbers
-
c-141 acft end application
-
aluminum alloy material
3C24866-103
NSN 1680-00-867-1651
Cross Reference:
3C24866-101
-
c-141 acft end application
-
aluminum alloy material
3C12374-105
NSN 1680-00-867-1667
Cross Reference:
3C12374-101
-
2.137 inches 1st end center to center distance between fulcrum and arm end hole/slot/ball
-
raised face pivot hole w/heel, clevis one end style designator
-
between 1.131 inches and 1.132 inches counterbore diameter
-
0.850 inches bore diameter
-
2.080 inches bore length
-
aluminum alloy material
-
between 1.131 inches and 1.132 inches counterbore diameter
-
0.850 inches bore diameter
-
2.080 inches bore length
-
aluminum alloy material
-
0.250 inches bore diameter
-
0.585 inches bore length
-
4.960 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
-
0.375 inches 2nd end end hole/ball diameter
-
aluminum alloy material
-
used on aileron bl 44.20 special features
-
steel material
-
raised face pivot hole, clevis both ends style designator
32-19751-303
NSN 1680-00-886-6546
Cross Reference:
32-19751-301
-
0.750 inches counterbore diameter
-
0.224 inches counterbore depth
-
0.625 inches bore diameter
-
1.594 inches bore length
-
3.750 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
-
0.250 inches bore diameter
-
used on directional force, trim upper special features
-
aluminum alloy material
-
raised faced holes, arched style designator
-
0.797 inches bore length
-
steel material
-
bearing features provided
-
between 0.873 inches and 0.874 inches bore diameter
-
between 0.813 inches and 0.818 inches bore length
-
4.000 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
-
aluminum alloy material
-
anodize surface treatment
-
between 0.575 inches and 0.578 inches bore diameter
-
1.031 inches bore length
-
3.000 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
-
0.250 inches 2nd end end hole/ball diameter
-
fulcrum bore has involute serrations special features
-
0.938 inches counterbore diameter
-
0.193 inches counterbore depth
-
0.812 inches bore diameter
-
7.180 inches bore length
-
5.000 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
123CSM11828-5
NSN 1680-00-907-1307
Cross Reference:
123CSM11828-1
-
1.687 inches bore diameter
-
3.077 inches bore length
-
steel material
-
0.378 inches bore diameter
-
0.500 inches bore length
-
4.700 inches 1st end center to center distance between fulcrum and arm end hole/slot/ball
-
0.188 inches 1st end end hole/ball diameter
-
aluminum alloy material