Electrical Dummy Loads - Page 101 of 122

3040 part numbers
MFJ-250X NSN 5985-01-471-6934
  • 50.0 impedance rating in ohms
  • +0.000/+400.000 megahertz frequency range rating
  • 400.000 watts average power rating
382NM NSN 5985-01-472-2577
  • 8.700 inches overall length
  • 2.630 inches overall height
  • 3.480 inches overall width
  • +0.000/+1.500 gigahertz frequency range rating
  • 1.10 voltage standing wave ratio
5201 NSN 5985-01-472-3126
1011177 NSN 5985-01-472-3266 Cross Reference: W-50-OHM-C
TL939022002 NSN 5985-01-472-3278
K19/AS00001295 NSN 5985-01-472-3504 Cross Reference: 927451-0053, K19/AS00001089
  • feat criticality code justification
TL939022001 NSN 5985-01-472-5130 Cross Reference: 939022001
  • test load is end item fixture special features
T3001007-01 NSN 5985-01-472-8132
  • approach light sequence flasher 2 (alsf2) end application
  • original name ac termination assembly special features
T3002041-01 NSN 5985-01-472-8135
  • approach light sequence flasher 2 (alsf2) end application
  • original name ac terminator special features
46650-51RFX Resistor Terminated: Rf-coaxial Terminator Male Cap NSN 5985-01-473-1313 Cross Reference: 10155146, 10155146-101, 45-925-0021, 93F1392
  • 1.110 inches overall length
  • 50.0 impedance rating in ohms
  • 0.571 inches overall diameter
  • +0.000/+4.000 gigahertz frequency range rating
  • 1.30 voltage standing wave ratio
43G0938 NSN 5985-01-473-8608
  • display system replacement (dsr) end application
61G8324 NSN 5985-01-473-8625
  • display system replacement (dsr) end application
177A335-1 NSN 5985-01-473-9092
  • display system replacement (dsr), cip a-01 end application
  • original name terminator, male special features
147A785 NSN 5985-01-473-9142
  • display system replacemen (dsr) , cip a-01 end application
65 N-75-0-11 NSN 5985-01-476-0559
  • 1092.2 millimeters overall length
  • 75.0 impedance rating in ohms
  • 502.7 millimeters overall diameter
  • gbs end application
  • 1.30 voltage standing wave ratio
TNA1-8-50-D3 NSN 5985-01-476-3441
131021 NSN 5985-01-477-2657
  • test hat assembly special features
10-T-MN NSN 5985-01-477-4209
  • -40.0 and 40.0 ambient tempurature in deg celsius at full rated power
  • 2.000 inches overall length
  • 1.300 inches center to center distance between mounting facilities parallel to length
  • 50.0 impedance rating in ohms
  • 2.000 inches body height
TNA1-8-50-D2 NSN 5985-01-477-6320 Cross Reference: 102-0006
E20523-000 NSN 5985-01-478-1118 Cross Reference: 98-20523
  • -40.0 and 65.0 ambient tempurature in deg celsius at full rated power
  • +14.000/+14.200 gigahertz frequency range rating
  • radar threat emitter an/mst-t1 end application
  • 1.15 voltage standing wave ratio
  • waveguide flange termination type
E20487-000 NSN 5985-01-478-2180 Cross Reference: 98-20487
G705938-1 NSN 5985-01-478-2447 Cross Reference: 0190-010-0
  • 50.0 impedance rating in ohms
  • all positions operating position
  • gpo load termination special features
TN120MC NSN 5985-01-478-2854
  • mc is a 2-watt unit with chain special features
11437058 NSN 5985-01-478-4888
  • feat criticality code justification
TNG1-6-3000 NSN 5985-01-478-5017
  • 1.680 inches overall length
  • 3000.0 impedance rating in ohms
  • 0.593 inches overall diameter
  • 0.500 watts average power rating
  • connection coaxial termination type