Radio Frequency Power Dividers - Page 12 of 32

783 part numbers
DL802F-1 NSN 5985-01-330-7032
DL601F-1 NSN 5985-01-330-7033
P-110/66054 NSN 5985-01-330-8791 Cross Reference: G452151-1
1D23573G01 NSN 5985-01-332-1965
  • an/sps-40b fc-11 (sstx) end application
1D23574G01 NSN 5985-01-332-1966
  • an-sps-40b fc-11 (sstx) end application
1D23615G01 NSN 5985-01-332-1967
  • an/sps-40b fc-11 (sstx) end application
ZFRSC-42-S NSN 5985-01-332-3083 Cross Reference: ZFRSC-42
PSCJ-2-2 NSN 5985-01-332-3084
HH-128-PIN NSN 5985-01-332-3085 Cross Reference: 61205-90057, 8249, HH-128
PSC-4-6 NSN 5985-01-332-3086 Cross Reference: 77090229, 91703076
61253-90074 NSN 5985-01-332-5741 Cross Reference: PS-261-B(STYLE 29)
  • 1.438 inches overall length
  • 0.938 inches overall height
  • 1.189 inches overall width
  • 1.20 voltage standing wave ratio
  • 0.5 insertion loss in decibels
1079263G1 NSN 5985-01-334-0100
  • an/slr-23 end application
2089-4198-00 NSN 5985-01-334-5464
8621N NSN 5985-01-334-5834
1536AS609 NSN 5985-01-334-7544
  • an/arq-49 repeater set radio pod end application
DQPD2450-HP NSN 5985-01-335-3370
M23971/14-02 NSN 5985-01-336-3361 Cross Reference: MIL-P-23971/14
  • 1.006 inches overall length
  • 0.125 inches overall height
  • 0.500 inches overall width
  • 1.30 voltage standing wave ratio
  • 0.6 insertion loss in decibels
78E6N5332 NSN 5985-01-336-3362
  • airborne jammer simulator an/alt-4 (v) end application
ZFSC-3-1-10 NSN 5985-01-336-5543 Cross Reference: 02-511994-2
  • 1.000 inches overall height
  • 1.20 voltage standing wave ratio
  • 1.0 watts average power rating
78E6N5338 NSN 5985-01-336-6556 Cross Reference: 2089-4202-00
  • airborne jammer simulator an/alt-4 (v) end application
PDM-42-6GA NSN 5985-01-336-7483
148-0316 NSN 5985-01-336-9127
6134702-1 NSN 5985-01-336-9313 Cross Reference: 26458B
  • metal; 2.530 in. lg; 1.000 in. w; 0.375 in. h special features
030-040-0004 NSN 5985-01-337-6293 Cross Reference: ZFSC-2-1-A-TNC
128SCAV754-1 NSN 5985-01-338-9694 Cross Reference: D307-ES
  • a-6c acft end application