Variable Attenuators - Page 83 of 104

2587 part numbers
1085AS466 NSN 5985-01-379-0928
  • ep3e acft end application
  • tray assembly, lower special features
1085AS467 NSN 5985-01-379-0930
  • ep3e acft end application
  • tray assembly, lower special features
150-033358-001 NSN 5985-01-379-0931
  • transmission line application design
  • fleet warfare electronic support group end application
  • mfr describes as attenuator, rf assembly special features
560000052-01 NSN 5985-01-379-4068
500000593 NSN 5985-01-380-1985
  • transmission line application design
  • coaxial type body style
  • 4.510 inches overall length
  • 0.800 inches overall height
  • 1.870 inches overall width
77C12525P001 NSN 5985-01-381-4570 Cross Reference: 77C712525P001
77A103939P001 NSN 5985-01-381-4719
77A103939P002 NSN 5985-01-381-4738
5616777-12 NSN 5985-01-382-3363 Cross Reference: ARS-1/66107
  • printed circuit board application design
  • rectangular, terminals on one surface body style
  • 1.350 inches overall length
  • 0.500 inches center to center distance between mounting facilities parallel to length
  • 0.470 inches center to center distance between mounting facilities parallel to width
C4803 NSN 5985-01-385-8667
  • audio application design
217-0219-010 NSN 5985-01-386-6489 Cross Reference: PA-534-26V/TTL/SMA
1044-18SMA NSN 5985-01-386-7105
  • transmission line application design
  • coaxial type body style
  • 7.000 inches overall length
  • 2.660 inches overall height
  • 3.420 inches overall width
TA51TH NSN 5985-01-386-8742 Cross Reference: 96182206
  • transmission line application design
  • coaxial type body style
  • 3.000 inches overall length
  • 3.000 inches overall height
  • 1.875 inches overall width
119-2523-00 NSN 5985-01-387-5863 Cross Reference: MODEL5282
T01101-001 NSN 5985-01-389-1862 Cross Reference: 2216329-001
  • transmission line application design
  • coaxial type body style
  • 1.770 inches overall length
  • 0.510 inches overall height
  • 1.650 inches overall width
231385-101 NSN 5985-01-389-1902 Cross Reference: 1606
  • transmission line application design
  • coaxial type body style
  • 2.640 inches overall length
  • 0.750 inches overall height
  • 1.750 inches overall width
AC-317 NSN 5985-01-389-3551 Cross Reference: 054517-0001, AT001D6-31
  • mk20 ils, instrument landing system mark 20 end application
1044-18N NSN 5985-01-389-7888
  • 1.350 and 1.500 and 1.650 voltage standing wave ratio
  • sma coaxial connector series designation
  • 2.0 watts average power rating
  • +0.0/+69.0 overall attenuation range in decibels
  • stepped attenuation variation method
DCA-1273 NSN 5985-01-390-0634 Cross Reference: 6011923-001
  • waveguide application design
  • 100.0 milliwatts average power rating
  • 2.5 insertion loss at minimum attenuation in maximum decibels
  • +0.0/+60.0 overall attenuation range in decibels
  • stepped attenuation variation method
231385-201 NSN 5985-01-390-2369 Cross Reference: S-116
  • transmission line application design
  • coaxial type body style
  • 2.640 inches overall length
  • 1.750 inches body diameter
  • 1.750 inches body length
DA0645B4 NSN 5985-01-391-0042 Cross Reference: 044628-0001
  • mark 20 end application
9406034 NSN 5985-01-391-8708
  • transmission line application design
  • continuous attenuation variation method
  • -1.00/+1.00 overall attenuation accuracy in decibels
  • 1 lever adjustment device type and quantity
  • 2 connector, coaxial, female terminal type and quantity
092-1503 NSN 5985-01-392-1284 Cross Reference: 22/4/09336/001-L, 422/4/09336/001, 422/4/09336/001-L, 50R-172
RA5037-PDS NSN 5985-01-392-1287 Cross Reference: 422/4/08468/100, 422/4/08468/100-O
45-10-34 NSN 5985-01-392-3208
  • transmission line application design
  • aluminum body material
  • -55.0/+125.0 degrees celsius operating tempurature range
  • n coaxial connector series designation