Special Features
This indicator has dual coil (similar to 6625-01-4xx-xxxx w/ single coil) notice "d" in p/n; may be manually or electrically reset; when coil is energized, electrical impulse causes display ball to change to set (white) or fault (black) color; when flux from reset magnet is allowed to flow in circuit, display ball spins to "reset" color which is black; indicator operates with a 50 millisec pulse length; display status is retained after pulse disappears, until reset
Diameter
0.500 inches
Length
1.832 inches
Mounting Hole Diameter
0.500 inches
Current Type
Dc
Dc Voltage Rating
6.0 volts
End Application
8520390-901 program cartridge, 8520305-901 digital processor, f-15i
Contact Type
Solder lug
Electrical Connection Quantity
4
Mounting Facility Type And Quantity
1 threaded case
Coil Dc Resistance
Between 3.4 ohms and 1200.0 ohms
Case Material
Aluminum
Part Name Assigned By Controlling Agency
Push built in test equipment (bite indicator with dual coil
Supplementary Features
Weighs 14 grams; operating temperature m65 to p125 degrees cel; leads shall be 30 ang polytetrafluoroethylene wire; max altitude 100, 000
