Pressure Transmitters - Page 72 of 92
2279 part numbers
EAS81230-4
NSN 6685-01-545-7094
Cross Reference:
DX7F0142ST-5IW
EAS81230-3
NSN 6685-01-545-7098
Cross Reference:
DX7F0142ST-3IW
-
refer, plant end application
-
zzzy criticality code justification
PCT-GP-600-G-2
NSN 6685-01-548-1225
Cross Reference:
A019748 PCT-GP-600-G-2
-
zzzw criticality code justification
-
dc current type
-
1 mounting device quantity
-
electrical resistance actuation method
-
compressor, low pressure end application
-
24.0 volts input voltage rating
060-H573-07
NSN 6685-01-548-9255
Cross Reference:
000-H573-00
-
dc current type
-
4 mounting device quantity
-
electrical resistance actuation method
-
28.0 volts input voltage rating
-
+0.0/+250.0 pounds pressure per square inch measurement range
D3264 PC 28.3
NSN 6685-01-550-3793
Cross Reference:
138-4845, D3263PC 6.2, IPTE-230-1000/50WC/15D, IPTE-230-1000-50WCD/15D, IPTE-230S-1000-50WC/15D
-
6.375 inches overall length
-
1.300 inches overall width
-
parts auxillary system end application
-
2 electrical connection quantity
-
plate mounting method
-
4.400 inches overall length
-
1.800 inches overall width
-
dc current type
-
24.0 volts input voltage rating
-
7.470 inches overall length
-
3.740 inches overall width
-
dc current type
-
4 mounting device quantity
-
2.530 inches overall thickness
-
4.880 inches overall length
-
2.000 inches overall width
-
dc current type
-
1 mounting device quantity
-
pressure sensing element actuation method
-
dc current type
-
conc-re-tem-ixer end application
-
1 wire to ground sender special features
-
3.600 inches overall length
-
2.400 inches overall width
-
dc current type
-
28.0 volts input voltage rating
-
pressure media non condensing air or gas special features
-
3.600 inches overall length
-
2.400 inches overall width
-
dc current type
-
25.0 volts input voltage rating
-
pressure media non condensing or gas special features
50724
NSN 6685-01-552-7137
-
3810-01-538-4030, all terrain crane end application
-
dc current type
-
1.500 inches overall diameter
-
hydraulic starter unit hs43-a9-0799-d end application
-
20 psi, g-unit; 10 point run calibration special features