Bell Cranks - Page 7 of 59

1465 part numbers
68A640028-1005 NSN 1680-00-249-8939
  • 1.240 inches bore diameter
  • 1.253 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
  • 0.250 inches 2nd end end hole/ball diameter
  • aluminum alloy material
68A640003-2003 NSN 1680-00-249-9180
  • 1.250 inches bore diameter
  • 2.000 inches bore length
  • 3.370 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
  • 0.250 inches 1st end end hole/ball diameter
  • aluminum alloy material
68A640005-1003 NSN 1680-00-249-9181
  • 1.230 inches bore diameter
  • 0.355 inches bore length
  • 2.500 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
  • 1.000 inches 1st end end hole/ball diameter
  • aluminum alloy material
159-318401 NSN 1680-00-251-5225
  • 0.125 inches 1st end slot width
  • 0.375 inches bore diameter
  • 0.437 inches bore length
  • 1.500 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
  • 0.1285 inches 2nd end end hole/ball diameter
89576-4 NSN 1680-00-251-5369 Cross Reference: 89576-14
  • bearing features provided
89576-5 NSN 1680-00-251-5370 Cross Reference: 89576-15
90048L NSN 1680-00-251-5375
  • hu-16 helicopter end application
90102-11 NSN 1680-00-251-5381
89576-1 NSN 1680-00-251-5702 Cross Reference: 89576-11
  • bearing features provided
68A610005-1004 NSN 1680-00-253-9579
  • 1.250 inches bore diameter
  • 5.500 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
  • 0.900 inches 1st end end hole/ball diameter
  • aluminum alloy material
68A610005-1003 NSN 1680-00-253-9580
  • 1.250 inches bore diameter
  • 5.500 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
  • 0.900 inches 1st end end hole/ball diameter
  • aluminum alloy material
68A640006-1003 NSN 1680-00-261-6026
  • 1.063 inches bore diameter
  • aluminum alloy material
  • anodize surface treatment
68A640011-1003 NSN 1680-00-261-6027
  • 1.063 inches counterbore diameter
  • 0.260 inches counterbore depth
  • 0.937 inches bore diameter
  • 1.882 inches bore length
  • aluminum alloy material
68A640006-1004 NSN 1680-00-261-6028
  • 1.063 inches bore diameter
  • aluminum alloy material
  • anodize surface treatment
68A640007-1001 NSN 1680-00-261-6029
  • 1.063 inches counterbore diameter
  • 0.260 inches counterbore depth
  • 0.937 inches bore diameter
  • 1.241 inches bore length
  • aluminum alloy material
68A640007-1002 NSN 1680-00-261-6030
  • 1.063 inches counterbore diameter
  • 0.260 inches counterbore depth
  • 0.937 inches bore diameter
  • 1.241 inches bore length
  • aluminum alloy material
68A731233-2007 NSN 1680-00-264-1386
  • between 0.500 inches and 0.507 inches bore diameter
  • aluminum alloy material
68A642020-1001 NSN 1680-00-264-1403
  • bearing features provided
68A480633-1003 NSN 1680-00-269-5190
  • 3.200 inches 1st end center to center distance between fulcrum and arm end hole/slot/ball
  • steel material
  • cadmium surface treatment
68A610006-1003 NSN 1680-00-270-1155
  • 0.560 inches bore diameter
  • 6.500 inches 2nd end center to center distance between fulcrum and arm end hole/slot/ball
  • 0.250 inches 2nd end end hole/ball diameter
  • stainless steel material
1205453-101 NSN 1680-00-272-3062
  • between 0.812 inches and 0.813 inches bore diameter
  • 0.750 inches bore length
  • latching mechanism door, aircraft fsc application data
68A630002-1003 NSN 1680-00-272-7707
  • aluminum alloy material
68A640015-1003 NSN 1680-00-272-7712
  • between 1.530 inches and 1.610 inches bore diameter
  • 2.380 inches bore length
  • aluminum alloy material
68A731033-2007 NSN 1680-00-272-7734
  • steel material
123AMM12149-1 NSN 1680-00-276-8859 Cross Reference: 123AMM14149-1
  • 0.750 inches bore diameter
  • between 0.276 inches and 0.281 inches bore length
  • aluminum alloy material
  • anodize surface treatment