Remote Control Levers - Page 5 of 32

798 part numbers
472P400C029-7 NSN 1680-00-163-3166
  • 0.500 inches overall width
  • between 0.385 inches and 0.392 inches bore diameter
  • 0.310 inches bore length
  • seat, aircraft ejection end application
  • plain straight bore type
123CVM10204-511 NSN 1680-00-163-4381
  • between 0.443 inches and 0.445 inches major diameter
  • 0.031 inches keyway width
  • 27 serration quantity
  • 0.625 inches keyway length
  • between 0.412 inches and 0.414 inches minor diameter
123LM10013-511 NSN 1680-00-163-4505 Cross Reference: 123LML0013-511
  • between 1.938 inches and 1.939 inches bore diameter
  • 1.312 inches bore length
  • shaft assembly, door, aircraft end application
  • plain straight bore type
  • aluminum alloy material
87749-6 NSN 1680-00-165-7991
  • steel per mil-s-18729 special features
4F02033-101A NSN 1680-00-168-9725
  • 0.060 inches keyway width
  • splined bore type
  • keyway features provided
  • keyway shaft securing method
  • steel material
123CM12017-501 NSN 1680-00-169-7449
  • between 0.740 inches and 0.760 inches bore diameter
  • between 2.593 inches and 2.608 inches bore length
  • aileron, flight control, aircraft end application
  • plain straight bore type
  • aluminum alloy material
461R022 NSN 1680-00-178-9222
  • stainless steel material
  • passivate surface treatment
14-41328-3 NSN 1680-00-180-0569
  • between 0.499 inches and 0.500 inches bore diameter
  • 0.500 inches bore length
  • hydraulic steering system end application
  • plain straight bore type
  • 2.500 inches center to center distance between link and shaft holes
205-060-751-3 NSN 1680-00-181-3184 Cross Reference: 205-060-751-003
  • 0.375 inches bore diameter
  • between 0.250 inches and 0.255 inches bore length
  • uh-1 series helicopter end application
  • plain straight bore type
  • 2.580 inches center to center distance between link and shaft holes
106941 NSN 1680-00-183-4345
  • 0.625 inches overall width
  • 0.361 inches bore diameter
  • plain straight bore type
  • between 0.875 inches and 0.885 inches center to center distance between link and shaft holes
  • 0.250 inches shaft end thickness
205604 NSN 1680-00-185-9209
  • 1.250 inches overall width
  • serrated bore type
  • 2.500 inches center to center distance between link and shaft holes
  • 0.630 inches shaft end thickness
  • 1.000 inches link end thickness
206504 NSN 1680-00-187-0347
  • 1.000 inches overall width
  • between 0.499 inches and 0.506 inches bore diameter
  • 0.750 inches bore length
  • plain straight bore type
  • 1.120 inches center to center distance between link and shaft holes
177278 NSN 1680-00-191-6644
  • between 1.249 inches and 1.250 inches bore diameter
  • 0.620 inches bore length
  • plain straight bore type
  • 3.300 inches center to center distance between link and shaft holes
  • 0.620 inches shaft end thickness
205390 NSN 1680-00-191-8257
  • 36 serration quantity
  • serrated bore type
  • 2.000 inches center to center distance between link and shaft holes
  • 0.750 inches shaft end thickness
  • 0.196 inches link end hole diameter
701697 NSN 1680-00-192-2590
240-2240310-2 NSN 1680-00-196-4118
  • between 1.625 inches and 1.626 inches bore diameter
  • 3.688 inches bore length
  • plain straight bore type
  • between 3.170 inches and 3.190 inches center to center distance between link and shaft holes
  • 3.688 inches shaft end thickness
1118704 NSN 1680-00-199-9740
  • 1.000 inches overall width
  • 0.625 inches bore diameter
  • 0.875 inches bore length
  • plain straight bore type
  • 2.500 inches center to center distance between link and shaft holes
318-526021-5 NSN 1680-00-208-8498
  • wing flat control, aircraft end application
  • plain straight bore type
  • aluminum alloy material
4413 NSN 1680-00-216-5761
  • 1.281 inches major diameter
  • 1 spline quantity
  • 1.2240 inches minor diameter
  • splined bore type
  • 4.300 inches center to center distance between link and shaft holes
1201558-103 NSN 1680-00-228-6320
  • 1.025 inches major diameter
  • 31 spline quantity
  • 0.938 inches minor diameter
  • splined bore type
  • split end screw clamping feature features provided
1200829-101 NSN 1680-00-234-7351
  • between 0.593 inches and 0.600 inches bore diameter
  • between 1.070 inches and 1.075 inches bore length
  • plain straight bore type
  • counterbore features provided
  • aluminum alloy material
114PS221-1 NSN 1680-00-237-4672 Cross Reference: J14534-2
  • between 0.396 inches and 0.402 inches major diameter
  • 1.000 inches overall width
  • 24 spline quantity
  • engine, acft, turbo-prop end application
  • between 0.365 inches and 0.367 inches minor diameter
3624013-1 NSN 1680-00-242-1753
  • split end screw clamping feature features provided
  • steel material
12C119-801 NSN 1680-00-244-6473 Cross Reference: 12C119-5
  • between 2.170 inches and 2.200 inches overall width
  • 28 spline quantity
  • splined bore type
  • 4.000 inches center to center distance between link and shaft holes
  • 1.000 inches shaft end thickness
472P022C010-7 NSN 1680-00-259-0219
  • between 0.256 inches and 0.263 inches bore diameter
  • 0.280 inches bore length
  • plain straight bore type
  • used on ejection seat special features
  • aluminum alloy material