Remote Control Levers - Page 7 of 32
798 part numbers
-
6.350 inches center to center distance between link and shaft holes
-
1.660 inches shaft end thickness
-
0.770 inches link end thickness
-
0.312 inches link end hole diameter
-
0.560 inches distance between fork inside spread
-
splined bore type
-
keyway features provided
-
used on control linkage, fuel dump, acft special features
-
aluminum alloy material
-
splined bore type
-
used on control rudder servo trim input acft special features
-
aluminum alloy material
-
paint surface treatment
-
splined bore type
-
used on control linkage, fuel dump, acft special features
-
aluminum alloy material
-
anodize surface treatment
-
plain straight bore type
-
used on gust lock, wing spoiler flap, acft special features
-
paint surface treatment
1285347-101
NSN 1680-00-298-1755
Cross Reference:
1203263-101
-
splined bore type
-
chromium surface treatment
-
between 0.938 inches and 0.939 inches bore diameter
-
between 0.259 inches and 0.260 inches bore length
-
plain straight bore type
-
link end threaded hole features provided
-
used on gust lock, wing spoiler, acft special features
339025
NSN 1680-00-304-2987
Cross Reference:
339025-3
-
2.250 inches overall width
-
splined bore type
-
7.000 inches center to center distance between link and shaft holes
-
1.000 inches shaft end thickness
-
0.750 inches link end thickness
-
3.740 inches overall width
-
splined bore type
-
10.000 inches center to center distance between link and shaft holes
-
1.500 inches shaft end thickness
-
1.500 inches link end thickness
-
0.656 inches overall width
-
between 0.373 inches and 0.375 inches bore diameter
-
0.594 inches bore length
-
plain straight bore type
-
2.500 inches center to center distance between link and shaft holes
-
1.250 inches overall width
-
0.750 inches bore diameter
-
0.562 inches bore length
-
plain straight bore type
-
2.500 inches center to center distance between link and shaft holes
-
offset, clevis link end style designator
-
splined bore type
-
used on retractable landing gear special features
-
aluminum alloy material
-
anodize surface treatment
-
0.590 inches bore length
-
1.810 inches center to center distance between link and shaft holes
-
0.590 inches shaft end thickness
-
0.200 inches link end thickness
-
0.193 inches link end hole diameter
-
0.810 inches overall width
-
between 0.500 inches and 0.503 inches bore diameter
-
plain straight bore type
-
3.000 inches center to center distance between link and shaft holes
-
0.500 inches shaft end thickness
-
serrated bore type
-
aluminum alloy material
-
qq-a-355, t4 federal specification single material response material specification
-
anodize surface treatment
-
between 1.001 inches and 1.003 inches bore diameter
-
1.200 inches bore length
-
plain straight bore type
-
1.200 inches center to center distance between link and shaft holes
-
1.200 inches shaft end thickness
-
between 1.001 inches and 1.003 inches bore diameter
-
1.210 inches bore length
-
plain straight bore type
-
1.550 inches center to center distance between link and shaft holes
-
1.210 inches shaft end thickness
-
0.875 inches overall width
-
serrated bore type
-
between 2.247 inches and 2.253 inches center to center distance between link and shaft holes
-
between 0.198 inches and 0.203 inches link end thickness
-
0.190 inches link end hole diameter
-
1.380 inches overall width
-
plain straight bore type
-
2.620 inches center to center distance between link and shaft holes
-
1.030 inches shaft end thickness
-
0.203 inches link end thickness
-
1.380 inches overall width
-
plain straight bore type
-
2.620 inches center to center distance between link and shaft holes
-
1.030 inches shaft end thickness
-
0.203 inches link end thickness
-
0.750 inches overall width
-
0.257 inches bore diameter
-
0.560 inches bore length
-
plain straight bore type
-
1.156 inches center to center distance between link and shaft holes
