Electrical Dummy Loads - Page 117 of 122

3040 part numbers
9999-0493-001 NSN 5985-01-602-6015
112330-2 Terminator 50 Ohm NSN 5985-01-602-6902
  • sma type, .5 watt special features
130846 Series Xx09 Feed Assembly Spare Parts Kit NSN 5985-01-602-6904
341-111G1 NSN 5985-01-602-8569 Cross Reference: CA-4157, FA-7157
  • air route surveillance radar 1 (arsr1) end application
PE6009 N Male Precision Termination Dc-18 Ghz NSN 5985-01-603-7678
  • 0.962 inches overall length
  • 50.0 impedance rating in ohms
  • 0.800 inches overall diameter
  • +0.0 to 18.0 gigahertz frequency range rating
  • 1.3 voltage standing wave ratio
85138B 85138b Coaxial Termination 50ghz NSN 5985-01-603-8825
  • calibration end application
  • male connector end design
  • connection coaxial termination type
  • coaxial mounted style designator
TN1-18 Male Connector NSN 5985-01-604-1718
  • 0.990 inches overall length
  • 50.0 impedance rating in ohms
  • 0.82 inches overall diameter
  • 1.0 and 30.0 and 1.0 voltage standing wave ratio
  • male connector end design
L284BB15 Waterload NSN 5985-01-604-6679
  • 10.75 inches overall length
  • +3.0 to 3.6 gigahertz frequency range rating
  • female connector end design
  • 2.0 megawatts peak power rating
  • waveguide flange termination type
TNG451P-6-78 Terminator-6inch Chain NSN 5985-01-605-1198 Cross Reference: 204-16025-7
  • e-3 block 404 end application
10-06403-25 NSN 5985-01-605-1489
  • cdlms end application
3001-7010-02DF Dc-18ghz Male 2 Watt Type N Termination NSN 5985-01-605-1578
  • 50.0 impedance rating in ohms
  • 0.83 inches overall diameter
  • cv-4448/usg c end application
  • 500.0 watts peak power rating
  • connector termination type
L50-TM NSN 5985-01-605-1582
  • b-2 bomber end application
437-7551549 FN AY-1-49 NSN 5985-01-605-7209 Cross Reference: B673-8155 FN AY-1-49
  • test station end application
CAL-MN-C N/male Precision Calibrate-cal-mn-c NSN 5985-01-606-2983
  • 2.750 inches overall length
  • 50.0 impedance rating in ohms
  • 0.500 inches overall diameter
  • 1.0 watts average power rating
  • connection coaxial termination type
A31159-003 NSN 5985-01-606-3669
64062-1 NSN 5985-01-606-7429
137-745-1 NSN 5985-01-606-8831
TNG1-13-78-D3 NSN 5985-01-607-0049
  • 1.68 inches overall length
  • 78.0 impedance rating in ohms
  • 5895-01-549-4134 end application
  • jacketed stainless steel 3.0 in rope special features
  • coaxial mounted style designator
142-0801-861 NSN 5985-01-607-3265 Cross Reference: 889608, 889608-1
  • 0.667 inches overall length
  • 50.0 impedance rating in ohms
  • 0.215 inches overall diameter
  • +0.0 to 2.0 gigahertz frequency range rating
  • apq-170slep end application
TN040M-150W NSN 5985-01-607-3539
  • 1.750 inches center to center distance between mounting facilities parallel to length
  • 3.460 inches overall width
  • 50.0 impedance rating in ohms
  • 5.710 inches body length
  • +0.0 to 4.0 gigahertz frequency range rating
0960-0301 NSN 5985-01-608-5154
M39030/3-13N Electric Dummy Load NSN 5985-01-608-7497 Cross Reference: M39030/3
  • apq-170slep end application
OSLNF50-1 NSN 5985-01-609-0531
  • test equipment (test) end application
32-1006 NSN 5985-01-609-4743 Cross Reference: 99200618
  • 0.300 inches overall length
  • 0.102 inches overall height
  • 0.200 inches overall width
  • 50.0 impedance rating in ohms
  • +0.0 to 4.0 gigahertz frequency range rating
3102 NSN 5985-01-609-6482